NON-WAX-BASED SEMI-PERMANENT RELEASE AGENTS:
#135T: POLYMER RELEASE AGENT
A polymer-based release agent which has high heat stability. Its polymers provide multiple releases and protection from high heat generated from accelerated exothermic reactions.
It is specially designed for:
• Accelerated Exothermic Resins up to 400º F or 204º C
• Multiple Releases
• Compression Molding
• Vacuum Bagging
• Resin Transfer Molding (RTM)
NOTE: For best results, use terry cloth or Turkish towels when applying #135T. Apply in a circular motion to mold by overlapping previous area. Work product in thoroughly over the mold creating a thin even coat. Check for uniform coverage. Allow it to dry. Reapply as directed.
#135T may be sprayed. When applying, if sprayed, we suggest wiping it lightly over sprayed film for uniform coverage.

#135ER: URATHANE RELEASE AGENT
It is recommended for the following types of urethane moldings:
1. Elastomer Urethane
2. Polyisocynate Component A
3. Hydro-Resin Component B
4. Urethane Foam
5. Isocynate Component A (Diphenylmethone)
6. Poly Component B (Polypreponal Glycol)
Note: For #135 ER, follow the same guidelines as #135T.